Fascia boards are an important component of your home's roofing system, as they protect the roof and help to prevent water damage. If your fascia boards are damaged or deteriorating, you may be wondering how much it will cost to replace them. In this article, we'll explore the average cost of fascia board replacement and the factors that can affect the final price.

Labor Cost To Replace Fascia Board

Every service provider price is different , however it shouldn't be much far off from one another when replacing fascia boards. For labor only You should expect to pay between $6 to $20 per linear foot .

Fascia boards or "Exterior Trim "are essential in protecting your home’s exterior by keeping out pests and allowing for ventilation in your attic. The cost to replace fascia boards —depending on the extent of the damage and the type of material you use—is $2,100 on average, but ranges from $600 on the low end to $6,000 on the high end. 

Need Fascia Boar Repair?

Cost Per Linear Foot

Every service provider prices vary. but are somehow within the range of one another ,Over time Fascia board and will begin to fail , chip, or warp. Needing to be repaired or replaced. The Fascia board which is usually a 1x6 board which is attached at the end of roof rafters tails. Although some styles can call for a larger or smaller size. On top of that this is what your gutters will attach to.

You may end up needing to repair or replace your fascia  because of water or weather damage.

The labor cost to install fascia ranges from $6 to $20 per linear foot. Costs may vary between companies. Different board materials also factor the cost. Options are composite, cement, and wood at relatively low price . PVC, aluminum, and vinyl on the more expensive option.

Often times, there's not much to replace. You may just have one section taken a beating from the weather or water damage . This is relatively easy to remove or cut out and replace. Hiring a handyman to come out and do so is fairly expensive . Lets say its only 8ft . you can expect to pay a minimum price plus whatever the cost of the material. This would only take 1-2 hours to do so

DIY Fascia Replacement Cost

You can always replace you own . Granted you have the proper tools and pretty handy . To replace a small single story home you would be looking at around $600 and up in materials . This all depends on the layout length of your home. The Type of fascia board you have or want.

When Installing wood fascia its recommended to cut 22.5 to 45 degree angles (scarf joint) rather than butting two pieces together The look will be more appealing and will also stop wood from bending as it expands and detracts . With materials being your only expense you can save hundreds or thousands of dollars doing this project on your own.

Also, if you are installing raw wood, be sure to use a primer on the wood. This will help protect it from the elements and last longer.

But if you’re unsure about your skill set, it’s best to hire a handyman near you. Incorrectly installed fascia boards and soffit will damage your roof, warranting costly repairs.

🔨 Struggling with Fascia Repairs? We’ve Got Your Back!

Fascia damage can compromise your home's structure and curb appeal, but tackling repairs doesn’t have to be a solo mission. If you’re unsure about doing it yourself or just need a little guidance, we're here to lend a hand.

Get the assistance you need today! Reach out to us for expert advice, professional-grade materials, and even hands-on help with your fascia repair project. We ensure you have the support to restore your home’s beauty and functionality, hassle-free.

Call 7133776336 to schedule a consultation or to learn more about our services. Don't let fascia woes go unaddressed—partner with us, and let’s tackle it together!

Your Home, Our Expertise

Factors That Can Affect The Cost Of Replacing Fascia Boards.

The cost of replacing fascia boards can vary depending on several factors. The size of your home, the type of material used for the fascia boards, and the extent of the damage are all factors that can affect the cost. Additionally, the cost of labor in your area and the contractor you choose can also impact the final price. It's important to get multiple quotes and compare them to ensure you're getting a fair price for the work

DIY VS Hiring A Handyman

While it may be tempting to save money by attempting to replace fascia boards yourself, it's important to consider the risks and potential costs of DIY. Without proper training and equipment, you could end up causing more damage or even injuring yourself. Hiring a professional contractor may cost more upfront, but they have the expertise and tools necessary to complete the job safely and efficiently. Additionally, a professional contractor may be able to identify and address any underlying issues that contributed to the need for fascia board replacement, potentially saving you money in the long run.

Material Cost

The material cost for fascia repairs can vary depending on several factors, such as the type of material you choose, the size of your home, and the specific needs of the repair. Here's a general idea of what you might expect for the materials alone:

Fascia boards cost between $1 and $20 per linear foot, with costs varying by material type. 

By Type

1. Wood Fascia Boards:
   • Cost: On average, wooden fascia boards can cost between $1 to $3 per linear foot. Higher-end woods or those treated for resistance to decay and insects may be more expensive.
2. Vinyl Fascia Boards:
   • Cost: Vinyl fascia materials typically range from $1 to $2 per linear foot. They are low maintenance and resist rot.
3. Aluminum Fascia Covers:
   • Cost: Aluminum fascia covers, often used to cap wooden fascia boards, can cost around $1 to $3 per linear foot.
4. Composite or PVC Fascia Boards:
   • Cost: These materials can range from $3 to $10 per linear foot. They are resistant to rot and insects and require minimal maintenance.
5. Additional Materials:
   • Nails/Screws: You will also need to purchase nails or screws, which can cost a few dollars per package.
   • Paint/Sealant: If you’re using wood that needs to be painted or sealed, this can add $20 to $50 to your total material cost depending on the quality and brand.
6. Tools and Equipment:
   • If you don’t have the necessary tools, you may need to purchase or rent them, which would add to the overall cost.

Keep in mind that prices can fluctuate based on region and the current market for building materials. For a more accurate estimate, it's best to measure the linear feet of fascia to be repaired and then check with local suppliers or home improvement stores for current pricing on the materials you’re considering. Don't forget to factor in a little extra for any unexpected issues or additional repairs that may be necessary once you start the project.

Wood Fascia

The most common type of fascia board because it’s easy to install and cost-effective at $1 to $3 per linear foot. Wood fascia boards are a traditional choice for many homes due to their natural appearance and the classic look they provide

Many newer homes have aluminum or vinyl siding, so it makes sense to choose a fascia material that matches, particularly since colors can be matched at the factory. Even so, the common process is to install wood fascia boards and then wrap them with vinyl or aluminum fascia covers. These are simply nailed into the wood and will never need paint. Six and eight inches are the most common widths.

Vinyl Fascia

is another option you could choose. However, it’s more expensive at $5 to $8 per linear foot. The cost to install composite and aluminum fascia will be more expensive, but they’ll last longer.

PVC Fascia Board

These are often used on newer buildings or ones where wood fascia boards need to be replaced. Since it is a direct alternative for wood boards, you don’t need backing boards because it can be fixed to the rafter ends. Made to look like natural wood, PVC is extremely durable and rot-resistant, as well as being paintable. You can expect to pay anywhere from  $3–$7 per linear foot.

How Long Does It Take To Replace Fascia?

The replacement phase time varies due to different factors like , Ease of access , Height of home, and the layout. Removing and replacing fascia boards should not take that long. It can be up to a couple of hours or 1-2 days. What could add extended time is if the trim needs caulked and painted to match color of previous .

What Causes Fascia Board To Rot?

• Leaky Gutters
• Storm Damage
• roof was installed incorrectly

Tips For Maintaining Fascia Boards To Avoid Costly Replacements.

Maintaining fascia boards is key to prolonging their lifespan and avoiding costly replacements. Here are some tips to help keep your fascia in top condition:

Fascia Maintenance Check list

1. Regular Inspections:
   • Conduct routine checks, at least twice a year, for any signs of damage such as cracks, rot, or peeling paint. Inspect them closely after severe weather conditions.
2. Prompt Repairs:
   • Address minor issues like small cracks or holes immediately to prevent them from becoming major problems. Use a wood filler for minor repairs and caulk to seal any gaps.
3. Proper Painting and Sealing:
   • Keep your fascia boards painted and sealed to protect them from moisture. Repaint the boards every few years or as needed to maintain a protective layer.
4. Clean Gutters:
   • Ensure gutters are clean and free of debris to prevent water from spilling over and soaking the fascia. This is especially important as water damage is a common cause of fascia deterioration.
5. Pest Control:
   • Regularly check for signs of pests such as termites or carpenter ants. If you spot any, treat the area promptly to avoid further damage.
6. Proper Ventilation:
   • Good attic ventilation can prevent heat and moisture buildup that could otherwise cause the fascia boards to rot from the inside out.
7. Quality Installation:
   • Ensure that your fascia boards are properly installed with the correct type of nails or screws and that there's adequate spacing to allow for wood expansion and contraction.
8. Trim Nearby Trees:
   • Keep tree branches trimmed back so they do not scrape against the fascia boards. This reduces the risk of physical damage and prevents leaves from clogging the gutters.
9. Weatherproofing:
   • Consider installing drip edges to direct water away from fascia boards, and ensure your roof’s flashing is in good condition to prevent water penetration.
10. Use Durable Materials:

• If you're in a particularly harsh climate, consider using materials like PVC, aluminum, or composite for your fascia which can withstand the elements better than wood.

Regular maintenance of fascia boards not only extends their life but also protects the overall integrity of your roof and the structure of your house. By following these tips, you can minimize the need for repairs and replacements, ultimately saving money in the long run.

Need Fascia Replacement or Repairs in Houston?

Request an online quote , or call 713-377-6336